Expert Chimney and Fireplace Services for Puget Sound Homes
Sweeping, inspections, repairs, and masonry from technicians who show up on time and explain exactly what they find.
Serving the Greater Seattle and Puget Sound region
Everything Your Chimney and Fireplace Need
Sweeping
We remove creosote and soot so your fireplace burns safely all season, and we leave no mess behind.
- Flue, smoke chamber, and firebox
- Floor and hearth protection
- Most visits take 30 minutes to an hour
Inspections
Camera inspections for annual checkups and home sales, with a clear written report.
- Level 1, 2, and 3 inspections
- Camera scan of the flue
- Written report with photos
Repair & Masonry
Cracked crowns, failing flashing, and crumbling mortar, repaired to last through Northwest weather.
- Tuckpointing and brick replacement
- Crown and flashing repair
- Firebox repair
Rebuilds
When a chimney is past repair, we rebuild it from the roofline or from the ground up to match your home.
- Partial rebuilds from the roofline
- Full rebuilds from the ground up
- Brick matched to your home
Caps & Waterproofing
A properly fitted cap and a breathable water-repellent seal keep rain, animals, and debris out.
- Fitted chimney caps
- Breathable water repellent
- Chase covers for framed chimneys
Gas Fireplace Services
Pilot won't stay lit? Fireplace won't turn on? We diagnose, clean, and repair gas fireplaces and inserts.
- Pilot, burner, and sensor cleaning
- Diagnosis and repair
- Gas fireplaces and inserts
Why Homeowners Choose North State
We show you photos of what we find and explain your options. No scare tactics, no pressure.
Drop cloths, shoe covers, and vacuums on every job. We leave your home the way we found it.
You get a real appointment window and a call when we're on the way.
You get a written estimate before we start. If we find something unexpected, we talk it through with you before going further.
Built for Puget Sound Weather
Months of rain are hard on a chimney. Water gets into cracked crowns, worn flashing, and aging mortar, and the damage often stays hidden until it reaches your ceiling. Our inspections focus on common moisture issues in Puget Sound chimneys.
The Parts of a Chimney, and What Goes Wrong
- Cap. Covers the top of the flue and keeps out rain, animals, and debris. A missing or rusted cap is an open path for water. Caps & Waterproofing
- Crown. The concrete slab that sheds water off the top of the chimney. Cracks let rain into the masonry below. Repair & Masonry
- Flue. Carries smoke out of the house. Creosote builds up on its walls with every wood fire. Sweeping
- Flashing. The metal seal where the chimney meets the roof, and one of the most common leak points. Repair & Masonry
- Brick and mortar. Masonry absorbs rain, and mortar joints wear away over time. Repair & Masonry
- Smoke chamber. Funnels smoke from the firebox into the flue, and collects buildup along the way. Sweeping
- Damper. Closes off the flue when the fireplace isn't in use. Rust here is a sign that water is getting in. Inspections
- Firebox. Where the fire burns. Firebrick and its mortar joints crack with heat and age. Repair & Masonry
When to Book
The best time for masonry repair, rebuilds, and waterproofing, which all need dry weather. It is also the easiest time to get a sweep on the schedule.
Sweep and inspect before the first fire of the season, ahead of the fall rush.
Our busiest months. Book early, and call right away if a gas fireplace stops working or smoke comes back into the room.
Have the chimney inspected before you use it again, even if it looks fine from the ground.
Simple From Start to Finish
- Schedule your visit.Call or book online and pick a time that works for you.
- We inspect and explain.Your technician checks the system and walks you through what they find.
- We do the work.Once you approve, we complete the cleaning or repairs.
Serving the Greater Seattle and Puget Sound Region
We work throughout the region, including Seattle, Tacoma, Bellevue, Everett, Olympia, Kent, Renton, Marysville, and surrounding communities.
Not sure if we come to you? Call us and we'll let you know.
Cities we serve
- Seattle
- Tacoma
- Bellevue
- Everett
- Olympia
- Kent
- Renton
- Marysville
- Surrounding communities
Common Questions
- How often should my chimney be swept?
- Fire safety standards call for an inspection every year, with cleaning as needed. If you burn wood regularly, plan on a sweep each year.
- Do gas fireplaces need service?
- Yes. Annual service keeps the burner, pilot, and venting working safely and catches small problems early.
- Will it make a mess?
- No. We cover the work area and use vacuums built to contain soot and dust.
- How long does a sweep take?
- Most cleanings take between 30 minutes and an hour.
- Why is my chimney leaking?
- The usual causes are a cracked crown, worn flashing, a missing cap, or porous brick. An inspection will find the source.